[grsec] 2.4.29 + raid HALT

[Tóth Nándor]

Hi!

Usually i run grsecurity on all my machines without problems.

Setup: Debian Sarge with manually compiled vanilla 2.4.29 kernel + 
grsecurity patch 2.1.1

When i install mdadm deb package (apt-get install mdadm) booting process 
is halted after the kernel is loaded.

If i remove package mdadm i can boot again.

I removed grsecurity from the kernel, now i have no problem.

-- 
Udv,
   Nandor

# Grsecurity
#
CONFIG_GRKERNSEC=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_GRKERNSEC_LOW is not set
# CONFIG_GRKERNSEC_MID is not set
# CONFIG_GRKERNSEC_HI is not set
CONFIG_GRKERNSEC_CUSTOM=y

#
# PaX Control
#
# CONFIG_GRKERNSEC_PAX_SOFTMODE is not set
CONFIG_GRKERNSEC_PAX_EI_PAX=y
CONFIG_GRKERNSEC_PAX_PT_PAX_FLAGS=y
CONFIG_GRKERNSEC_PAX_NO_ACL_FLAGS=y
# CONFIG_GRKERNSEC_PAX_HAVE_ACL_FLAGS is not set
# CONFIG_GRKERNSEC_PAX_HOOK_ACL_FLAGS is not set

#
# Address Space Protection
#
CONFIG_GRKERNSEC_PAX_NOEXEC=y
CONFIG_GRKERNSEC_PAX_PAGEEXEC=y
CONFIG_GRKERNSEC_PAX_SEGMEXEC=y
# CONFIG_GRKERNSEC_PAX_EMUTRAMP is not set
CONFIG_GRKERNSEC_PAX_MPROTECT=y
# CONFIG_GRKERNSEC_PAX_NOELFRELOCS is not set
CONFIG_GRKERNSEC_PAX_ASLR=y
CONFIG_GRKERNSEC_PAX_RANDKSTACK=y
CONFIG_GRKERNSEC_PAX_RANDUSTACK=y
CONFIG_GRKERNSEC_PAX_RANDMMAP=y
CONFIG_GRKERNSEC_PAX_RANDEXEC=y
CONFIG_GRKERNSEC_KMEM=y
# CONFIG_GRKERNSEC_IO is not set
CONFIG_GRKERNSEC_PROC_MEMMAP=y
# CONFIG_GRKERNSEC_BRUTE is not set
# CONFIG_GRKERNSEC_HIDESYM is not set

#
# Role Based Access Control Options
#
# CONFIG_GRKERNSEC_ACL_HIDEKERN is not set
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30

#
# Filesystem Protections
#
CONFIG_GRKERNSEC_PROC=y
CONFIG_GRKERNSEC_PROC_USER=y
CONFIG_GRKERNSEC_PROC_ADD=y
CONFIG_GRKERNSEC_LINK=y
CONFIG_GRKERNSEC_FIFO=y
# CONFIG_GRKERNSEC_CHROOT is not set

#
# Kernel Auditing
#
# CONFIG_GRKERNSEC_AUDIT_GROUP is not set
# CONFIG_GRKERNSEC_EXECLOG is not set
CONFIG_GRKERNSEC_RESLOG=y
# CONFIG_GRKERNSEC_CHROOT_EXECLOG is not set
# CONFIG_GRKERNSEC_AUDIT_CHDIR is not set
CONFIG_GRKERNSEC_AUDIT_MOUNT=y
# CONFIG_GRKERNSEC_AUDIT_IPC is not set
CONFIG_GRKERNSEC_SIGNAL=y
CONFIG_GRKERNSEC_FORKFAIL=y
CONFIG_GRKERNSEC_TIME=y
# CONFIG_GRKERNSEC_PROC_IPADDR is not set
# CONFIG_GRKERNSEC_AUDIT_TEXTREL is not set

#
# Executable Protections
#
CONFIG_GRKERNSEC_EXECVE=y
# CONFIG_GRKERNSEC_SHM is not set
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_RANDPID=y
# CONFIG_GRKERNSEC_TPE is not set

#
# Network Protections
#
CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_RANDISN=y
CONFIG_GRKERNSEC_RANDID=y
CONFIG_GRKERNSEC_RANDSRC=y
CONFIG_GRKERNSEC_RANDRPC=y
# CONFIG_GRKERNSEC_SOCKET is not set

#
# Sysctl support
#
# CONFIG_GRKERNSEC_SYSCTL is not set

#
# Logging options
#
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=4